Farm Auction in Neche North Dakota, United States

07 Tuesday
07th April, 2020 10:00 AM


Farm Auction in Neche North Dakota, United States

Tuesday at - 07th April , 2020



Location has been calculated by address and may not be 100% accurate.

Auction Items For Sale




TUESDAY, April 7, 2020 – 10:00 AM


LOCATION: 10851 143rd Ave NE, Neche, North Dakota- Driving directions from Neche, ND, 108th Street is on the west side of HWY 18 at Neche, west 1 mile on 108th St, north on 143rd Ave ½ mile, 1/8 mile west & 1/8 mile north


AUCTIONEER’S NOTE: Jeff has decided to retire from farming.  Please note a diversified line of equipment used on low acres.  Major machines have been kept indoors.  All units have been well maintained.




LOAD OUT INFORMATION: Load out assistance will be available auction day; 8AM to 4PM April 1, and 8AM to 4 PM April 2nd.  All items must be removed by April 14th, 2020



*1997 New Holland 8970 MFWD, power shift, Super Steer, Mega Flow hyd1000 PTO, 4 hyd, 14.9R28 fronts w/ fenders, 14.9R46 rear triples, front weights, 6305 hrs, SN#D412997

*1996 New Holland 8870 MFWD, power shift, Super Steer, Mega Flow hyd1000 PTO, front hyd, 14.9R30 fronts w/ fenders, 14.9R46 rear duals, front weights, 6702 hours, SN#D409883

*1990 Case IH 7120 MFWD, power shift, 3pt, 540/1000 PTO, 3 hyd, 14.9R30 fronts w/ band duals, 14.9R46 rear duals, front weights, 9737 hrs, SN#JJA0028975

*1980 Versatile 875 4WD, 12 spd std trans, hydrecent engine OH & new clutch, 20.8-38 duals, good rubber, 10200 hrs, SN#056666

*1978 White 2-105 2WD, CAH, 3pt, 540/1000 PTO, 3 hyd, 14.9R46 rear tires, 5647 hrs, SN#276827-406

*IHC TD9 diesel crawler /hyd dozer- has not ran in years



*1992 Case IH 1680 combine w/ updated 2388 enginestd rotor w/ updates and aggressive bars chopper, 30.5-32 fronts, 14.9-24 rear tires, 4274 eng hrs, SN#118377

*1987 JD 8820 Titan II combine, DAM, DAS, HHC, F/A, chaff spreader, 30.5-32 fronts, adj rear xle, 3795 eng hrs, SN#H08820X620549

*Case IH 1020 25’ flex head w/ CWS air bar & F/A, SN#JJC0084483

*Case IH 1020 25’ flex head w/ finger reel & F/A, SN#JJC0325436

*Case IH 1015 7 belt pkp head, SN#JJC0052947

*Case IH 1015 pkp head w/ Sund 11’ pkp

*JD 925 25’ rigid head w/ batt reel & F/A, SN#H00925635736

*JD 925F 25’ flex head w/ finger reel, long & short dividers, SN#H00925F672789

*JD 212 pickup head w/ Elmers 12’ bean pkp

*Elmers 25’ header trailer

*V-Trailer header trailer

*Shop built header trailer



*1995 Ford L8000 tandem twin screw, 8.3L Cummins, 9 spd, 20’ Strong box w/ roll tarp, hoist & combo end gate, new clutch, 11R22.5 tires, 202475 miles showing

*1985 GMC Brigadier tri-axle, 855 Cummins 350hp, 9 spd22’ Strong box w/ roll tarp, hoist, combo gate & rear control, full 3rd tag, 315/80R22.5 fronts, 11R22.5 rears, rear pintle hitch & bumper, 638430 miles showing

*1981 IHC S1900 tandem twin screw, 466DT diesel, 5/2 trans, 20’ Buffalo box, roll tarp, hoist & combo gate, 11R22.5 tires, 142300 miles showing

*1980 IHC S1900 tandem twin screw, 446 gas, 5/2 trans, 19’ Knapheide box, roll tarp & hoist, 275/80R22.5 tires, 63200 miles showing

*1974 IHC 1700 single axle, 392, 5/2 spd, 15’ Knapheide box, plumbed for drill fill, 9.00-20 tires, 43650 miles showing

*1971 Chev C60 tandem twin screw, 427, 5/4 spd, 18’ Westeel box & roll tarp, 10.00-20 tires, 42972 miles showing

*1970 IHC 1600 single axle, 345, 5/2 spd, 15’ Knapheide box, 9.00-20 tires, 36150 miles showing

*1967 IHC 1700 tag tandem, 345 v-8, 4/2, 18’ Knaphiede box & hoist

*2003 Load Line 18’ x 8 ½’ pup trailer w/ 52” sides, 3pc endgate w/ roll tarp & hoist, air brakes, 11R22.5 tires on steel disk wheels



*2008 Chev Silverado 1500 4WD 4-door pickup, 5.3L eng, auto trans, cloth int, A/C, tilt, cruise, PWL, power seat, 177962 miles showing, VIN#2GCEK13M381182765

*1989 GMC 3500 1T 2WD service truck, 350 eng, auto trans, 12’6” bed w/ tool boxes, 200 gal fuel tank, pump, air compressor w/ Honda eng, manual crane & Tommy lift, 134779 miles showing

*1985 DodgD250 Prospector 4x4 3/4T reg cab pickup, 360hp, 4BBL carb, auto trans, 9.50R16.5 tires, bought new on farm, 79060 actual miles

*1998 DCT 18’ car trailer w/ ramps, side boards, 2- 3500lb axles, HD jack, rear tip back legs & 7.50-16 tires

*2010 Tarnel car trailer w/ ramps, 2” ball & 205/75R15 tires

*Shop built trailer


*2014 Wilrich QX2 33’ field cultivator w/ 3 section fold, 4 bar harrow, 10” sweeps, walking tandems around, single pt depth control, twin spring shanks & 4 castor gauge wheels, very low acres, SN#AGCWFCFH0EX462694

*2014 Wilrich 2530 23’ chisel plow w/ 3” twist shovels, heavy tine harrows w/ 5/8” x 26” tines3 section flat fold, 12R22.5 walking tandems, very low acres, SN#AGCW2555300EX462815

*JD 650 25’ disk w/ 11” spacing, 3 section fold, single pt depth control, dual wheels on main frame, SN#N00650X000218

*JD 610 33’ spring stdchisel plow w/ 3” twist shovels, ½” x 19” Summers HD harrow, walking tandems around & single pt depth control, SN#610X007070

*JD 335 32’ disk w/ 9” spacing, 3 section fold, single pt depth control, dual wheelsaround, SN#010177

*Case IH 4700 45’ field cultivator w/ 5 sect fold, 3 bar harrow, 10 ½” sweeps, walking tandems around & wings gauge wheels, SN#0250000C003735

*Flexicoil System 95 60’ harrow packer w/ 5 bar harrowscoil packers, auto fold, 500 gal chem kit, SN#595 A600 1020805

*JD 9350 30’ (3-10) 6” press drills w/ roll tarps, markers & factory end transport

*Farm King 60’ diamond tooth auto fold harrow

*Herman 40’ Super Weeder w/ 4 bar harrow, 3 rank Danish tines, hyd retract

*Melroe 42’ 2 rank multiweeder

*Wilrich 14’ field cultivator w/ 4 bar harrow

*2) JD 3200 6-18 auto reset plows w/ hitch, SN#100834, SN#101251

*JI Case 7 btm semi mt plow



*1998 JD 1730 12R22 vacuum planter w/ 1.6BU hoppersherb/insecticide, 250 monitor, lift assist & markers, beet & edible bean plates, SN#H01730R680186

*JD 7300 24R22 Maximerge II planter on Elmers bar, 1.6 bu hoppers, herb/ insecticide, 350 monitor, tarp, V plows & windscreens 


*2) Elmers 12R22  single shank cultivators w/ large rolling shields & guide cones

*2008 Pickett One Step 12-22-2-B 12R22 edible bean cutter/ windrowersolid shank, center delivery rear table, 8 bar pkp & dividers, SN#09-302

*Lilliston 7200 14’ bean windrower 



*1999 H&S HPS 9099 90’ suspended boom sprayer w/ 1000 gal tank, Hypro 1000 PTO pump, 3 sect control, triple nozzle bodies, touch down wheels, foam markers & 14.9R46 tires, SN#0059

*Brittonya 36R22 band sprayer w/ 500 gal tank, 12” nozzle spacing & hyd PTO press pump

*Summers 60’ pickup sprayer w/ 500 gal tank, 8hp Honda engine & markers

*1635 gal horizontal tank on skid w/ 2” pump & 15 gal mixing cone

*2) 1500 gal poly tank w/ 2” pump & 55 gal mixing cone

*Easy Load 18 twin hopper drill tender w/ side augers, elec over hyd controls & clear site gauges





*REM 1062B grain vac w/ 7” flex tube & rubber takeout hose, 1000 PTO, SN#RM-99-1026B-3997

*Convey All TCH-1090 10 x 90 hyd drive conveyor w/ hyd swing belt & 540 PTO, SN#0406108135

*2014 Convey All TCSNH-1035 35’ conveyor w/ field loader hopper & 10hp single ph motor, SN#25101310346

*Farm King 13 x 70 auger w/ hyd lift & mech drive swing hopper,540 PTO

*Westfield J208-51 auger w/ 10hp single ph motor, SN#162517

*Westfield 70-31 7 x 31 auger w/ 5hp single ph motor, SN#E7467

*ConveyAll 9 x 11 jump auger w/ hyd drive

*Westfield tailgate drill fill w/ brush auger


HOPPER BINS & ACCESSORIES (All to be removed by July 31, 2020):

*3) Lorrich 3000BU hopper bins w/ aeration fans

*Meridian 3000BU hoper bin w/ aeration fan

*Meridian 3000BU hopper bin w/ inline centrifugal fan

*2) Westeel bin w/ O’Shea hopper, inline centrifugal fan

*1200BU, 1500BU & 1800BU steel hopper bins

*3) 10000 BTU bin heaters & Rocket tube aeration kits





*Ashland I-80 8yd push off scraper w/ 16.5L16.1 rear tires, SN#16085

*Buhler 3pt yard drag w/ 2 new harrows

*Buhler Farm King 1080 108” 2 stage double auger snow blower w/ 1000 PTO, hyd twist & tip spout, SN#20400622

*Hammerback 10’ killifer w/ single hyd lift & new tires

*2) Fargo 2000 gal fuel tanks w/ 35 gpm pumps

*Tonutti T9 9-wheel one way hay rake, low acres, SN#677486

*Woods BW180HD 15’ batwing mower w/ 3 sections, 1000 PTO & 29x9.0-15 tires, SN#1188199

*cyl gas generator w/ GE 300 DC welder on single axle trailer

*12” 3pt PTO post hole digger 

*Ag Krane 3pt hyd pallet or tote picker w/ tree saw attachment

*Versatile 400 14’ hydro swather w/ Ford 200 gas engine, mounted on shop built tandem trailer- set up to cut weeds in row crop

*Canola roller

*Snap On 9-drawer tool box, 26”W, 15”D

*Snap On 17-drawer tool box w/ stainless top, 53”W, 20”D, 41”H

*Snap On 7-drawer rolling tool box, 26 ½”W, 19 ½”D, 37”H

*Baldor 20hp 3 phase motor

*Baldor 5hp 220V single phase motor

*Approx 12) Business band radios & 1 handheld radio

*A good qty of other farm misc including truck and machinery parts, tires, tools and more!!



For More Information, Contact Jeff at 701-886-7464, leave a message


TERMS: Cash, cashier’s check, wire transfer, approved check in US funds.  All sales final.  Statements made auction day take precedence over all advertising.  Document fee on vehicle titles will apply & vehicle titles will be mailed to buyers. 


Canadian buyers are always welcome.  Please furnish a letter of credit for registration. Some purchases require payment by wire. Most units move easily across the border, feel free to ask in advance for document assistance if necessary. 


AUCTIONEERS & CLERK: Resource Auctions, Dennis Biliske- Auctioneer, 2702 17th Ave S, Grand Forks, ND 58201, ph 701-757-4015, fax 701-757-4016, email- [email protected], website-