37 in. Wide Belt Sander, 220V 3-Phase. Laguna Pro Series industrial wide belt sander, model MSANWB37x75-1K-20-0197-1, serial 10603103, dated 2022/07. Data plate lists 220V, 3-phase, 60 Hz, 54 amp. Equipped with Enduro control panel, large feed table_conveyor, enclosed sanding head, and dust collection hood duct connection. Includes pictured operation manual. This is a substantial commercial-grade sanding machine suited for cabinet, millwork, furniture, and woodworking or metal working shop use. Buyer should inspect, verify phase/power requirements. Equipment/forklift is available, but buyer is responsible for rigging/removal. Per the manufacterer: “This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a separate 1HP motor and has a variable speed conveyor of 12-60 FPM.
Features
You can adjust the thickness in 3 ways:
Manual hand-wheel on the bottom of the machine.
By pressing the up or down arrow the table will move in desired direction.
By tapping these same arrows the machine will move an exact amount each tap.
The auto thickness gauge will measure your wood piece and automatically set the table to the thickness of the piece of wood inserted.
Specifications
Single Drum
Main Motor: 20HP, 220V, 3 Phase
Variable Feed Motor: 1HP
Table Lifting Motor: 0.25HP
Capacity: 37″
Belt Length: 75″
Max Sanding Width: 36 1/2″ (927mm)
Sanding Belt Size: 37″ x 75″ (940mm x 1905mm)
Adjustable Sanding Platen: 3″ (76mm)
Diameter of Sanding Drum: 4″ (101mm)
Length of Sanding Drum: 37″ (965mm)
Sanding Drum RPM: 1725
Variable Conveyor Speed: 12 � 60 fpm
Dust Port Size: 4″ (101mm)
Number of Dust Ports: 3
Footprint: 19″ x 51″ (483mm x 1300mm)
Width x Depth: 56 1/2″ x 51″ (483mm x 1300mm)
Height With Dust Collection Ports: 77 1/2″ (1968mm)
Height Without Dust Collection Ports: 71 1/2″ (1816mm)
Conveyor Height at Lowest Setting: 32” (813mm)
Cabinet: Steel
Operating Air Pressure: 6 Bar
Sanding Belt Oscillation: Adjustable
Sanding Belt Motor Brake: Yes. Air Operated Disc Brake
CSA: Fully Certified
Net Weight: 1980 lbs