Fleet # –
Year – 1995
Make – Ford
Model –
Body Style – Truck with Henderson Spreader (Salvage)
VIN/SN – 1FDZY82E4SVA65426
Odometer Numbers – 135344
Hours –
Engine Make/Model – Engine is removed
Cyl –
Fuel Type –
Transmission Name – Transmission is removed
Transmission Type –
Single Axle/Dual Axle – Tandem Axle Dual Wheel with Front Steer Wheels
Tire Size/Type – 11R22.5
Tire Condition – Good
Plow Size –
Dump Box Size –
Drivetrain –
GVWR – 64,000Lbs
Does the unit operate? – No
Does the vehicle start? – No
Are keys available? – No
Ownership Information – Title
Mechanical Condition – Unknown
Mechanical Notes – Salvage chassis with heavy duty working spreader, it has no front clip, engine or transmission, the chassis and spreader must be towed from the facility. It was last inspected in 2025 and has been parted out except for the spreader system which is a pricy heavy duty working system.
Body Condition – Fair
Body Notes – The lower double frame is in fair condition. The cab is in poor shape. The Henderson hydraulic v-box spreader is a model #FSH x 16 x 68 x S/S, S/N #FSH-707876-1. The spreader base frame measures 15'L x 94"W with (2) side mounted 80-gallon poly brine tanks and pump system. High-capacity stainless steel v-box hopper with integrated liquid pre-wet tanks and closed-loop electronic controls.
Interior Condition – Poor
Misc Info – Spreader system was controlled by the Rexroth CS530 Compu-Spread which can completely program the spreader functions and includes the USB key.
The following general information is web-sourced and may contain variances from the subject unit:
A model #FSH x 16 x S/S spreader is a highly capable, heavy-duty municipal configuration engineered by Henderson Products for serious winter weather operations. By combining a high-capacity stainless steel v-box hopper with integrated liquid pre-wet tanks and closed-loop electronic controls, this commercial-grade rig is designed for max efficiency, precision material distribution, and high corrosion resistance.
Here is a breakdown of what this exact unit, the model configuration, and its control systems offer:
Spreader & Frame Anatomy (Model #FSH x 16 x S/S)
- FSH Series Lineage: The "FSH" stands for Full-Size Hydraulic (Heavy Duty) Hopper Spreader. It is engineered primarily for Class 8 tandem-axle or heavy-duty chassis. It is specifically built to "slip-in and slip-out" of standard dump bodies or mount natively to a dedicated flatbed chassis.
- Massive 16-Foot Length ("x 16"): At 16 feet long, this is the largest standard hopper size available in the FSH lineup. It maximizes material payload (typically carrying upwards of 6 to 9+ cubic yards of granular deicing material depending on side-height configurations), limiting the frequency of reload trips back to the maintenance yard.
- Stainless Steel Build ("x S/S"): The Stainless Steel construction means the entire hopper structure—including the conveyor sills, outer shell, and longitudinal framework—is fabricated from premium-grade stainless steel (commonly 304 or 409 SS). This provides ultimate protection against the extreme, accelerated rust environment caused by salt and calcium chloride mixes.
- Heavy-Duty Base Frame (15'L x 94"W): The chassis footprint measures 15 feet along the base with an extra-wide 94-inch platform, giving it an incredibly stable center of gravity inside a heavy dump truck or on a chassis bed.
Integrated Liquid Pre-Wet System
- Dual 80-Gallon Poly Brine Tanks: Flanking the v-box are two side-mounted, heavy-duty polyurethane tanks providing a total onboard capacity of 160 gallons of liquid brine or anti-icing fluid.
- The Pre-Wet Advantage: This dedicated pump system injects brine directly onto the dry material (salt/sand) right as it hits the spinner chute. Pre-wetting activates the salt immediately to melt ice at lower temperatures and—critically—stops the dry salt from bouncing or blowing off the road surface, saving municipalities up to 30% in material waste.
Brain of the System: Rexroth CS530 Compu-Spread
The performance of this spreader is fully unlocking by the Bosch Rexroth Compu-Spread CS530 Solids & Liquid Controller, which sits inside the truck cab.
- Proportional 3-Axis Electronic Control: The CS530 completely manages the three critical proportional hydraulic loops: Conveyor Speed (material output), Spinner Speed (spread radius/width), and Liquid Pump Speed (pre-wet injection percentage).
- Ground-Speed Orientation (Closed-Loop Mode): The controller integrates directly with the truck's vehicle speed sensor. When programmed, it ensures that your material application remains perfectly uniform regardless of how fast or slow the truck is moving. If the truck comes to a stop at a red light, the conveyor instantly stops, entirely preventing wasteful piles of salt from dropping in one spot.
- Advanced Operator Features: Features a 5.5-inch organic light-emitting diode (OLED) display with detented dial controls. It includes a programmable Blast function for dump-on-demand at heavily iced intersections, a Pause function for bridges or railroad crossings, and data logging capabilities to pull storm/season operational totals via USB key
Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.
