Fleet # –
Year – 2017
Make – Finn
Model – T60
Body Style – Hydro Seeder
VIN/SN – 1F9SS1711HF135653
Odometer Numbers –
Hours – Approximately 1500
Engine Make/Model – Kohler Command Pro Model #CH730, 725 cc, 23.5 HP
Cyl – V-Twin 2
Fuel Type – Gasoline
Transmission Name –
Transmission Type –
Single Axle/Dual Axle – Single axle/Single wheel
Tire Size/Type – ST225/90R16 new last year
Tire Condition – Good
Plow Size –
Dump Box Size –
Drivetrain –
GVWR – Estimated at 7,600lbs
Does the unit operate? – Yes
Does the vehicle start? – Yes
Are keys available? – Yes
Ownership Information – Title
Mechanical Condition – Good
Mechanical Notes – It is well maintained. It was considered to be in very good condition but currently the agitator seal has a minor leak and the seller has added a new “FINN TWIN PACK Bearing and seal kit” to repair the hydro seeder if desired (Shown in photos), this unit has no other known issues, and is being sold due to normal rotation of equipment. The “VIDEO TAB” has a video of this unit in operation.
Body Condition – Good
Body Notes – Solid with average wear, very clean unit, View images
Interior Condition – Good
Misc Info – View below some general information of a T60 hydro seeder.
- Tank Capacity: Features a 600-gallon liquid capacity tank with a 500-gallon working capacity.
- Coverage: It is designed to cover up to 7,200 square feet per load with a single slurry mixture of seed, fertilizer, and mulch. It averages about 6 loads per acre.
- Physical Structure: Built with a low profile for easy material loading and excellent towing stability. The carbon steel tank is protected with heavy-duty corrosion-resistant coatings.
- Powerhouse: Powered by a 23.5 HP Kohler Command Pro CH730 725cc V-Twin gas engine. This air-cooled engine includes an automatic low-oil pressure safety shut-off system.
- The “Clump” Pump System: Utilizes a FINN direct-drive 3” x 1.5” centrifugal pump driven by an in-line common shaft clutch. By doing away with high-cost maintenance components like drive belts, couplings, or complex hydraulics, it delivers higher torque efficiency directly to the slurry. It handles up to 3/4″ solids and delivers 65 GPM at 75 PSI.
- Paddle Agitation: Features a hydraulically driven, reversible mechanical paddle agitator alongside liquid recirculation. This ensures the entire mulch bale is ground and perfectly mixed without settling.
- Dual Controls: For operational safety and convenience, controls for the agitator speed and direction are accessible at both the front and rear of the machine.
- Heavy Duty Hose Reel: Equipped with a Reelcraft Nordic Series 3900 Electric Hose Reel. This heavy-duty motorized reel relies on a 12V DC motor and a rugged 1/2″ pitch chain and sprocket drive system. It features an integrated electronic rewind function and an auxiliary manual bevel crank backup in case of power loss.
- Triple Nozzle Setup: Includes three distinct nozzles designed to tackle various terrain layouts:
- Wide Fan: Best for close-up, uniform, rapid ground coverage.
- Medium/Narrow Fan: Ideal for precise trimming along sidewalks, driveways, or target areas.
- Long Distance: Engineered to achieve maximum projectile reach (units without towers can spray up to 90–100 feet via the hose line).
- Storage: A large built-in toolbox is integrated right into the trailer hitch frame, making it simple to secure these nozzles and extra fittings safely.
- Tires: Mounted on heavy-duty ST225/90R16 trailer tires configured on a single axle, making it lightweight enough to be easily towed to job sites by a standard utility pickup truck.
Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.
