2014 International WorkStar 7600 Pak-Mor 30 Yard Packer Truck

The following general information is web-sourced and may contain variances from the subject unit:

• Design & Architecture: It features a highly durable Compacted Graphite Iron (CGI) block, which yields exceptional strength with less weight than traditional iron. It utilizes a four-valve-per-cylinder layout with an overhead cam and a high-pressure common-rail fuel system running up to 32,000 psi for efficient combustion. 
• Power Output: Depending on the exact factory spec sheet chosen, this engine generally delivers between 330 to 390 Horsepower and provides hefty mid-range torque peaking between 1,250 and 1,450 lb-ft of torque at a low 1,000 RPM. This massive low-end torque is critical for launching a heavy trash truck from a dead stop at every house. 
• Aspiration: It leverages a twin-series turbocharger setup with an interstage cooler. A smaller turbo provides instant low-end throttle response, while the larger turbo takes over at higher loads. 
• Emissions (2014 Context): Navistar famously relied on an Advanced EGR (Exhaust Gas Recirculation) system to manage emissions on these engines without the initially widespread use of SCR/DEF fluid. 

• Continuous Power Technology: Unlike manual or automated-manual gearboxes, Allison’s torque converter allows for uninterrupted power shifts to the drive wheels. This eliminates wear on traditional mechanical clutches during grueling stop-and-go refuse routes.
• Provisions for PTO: The RDS series features dedicated Power Take-Off (PTO) gear setups. This ensures continuous hydraulic pump power can be channeled straight to the Pak-Mor packer body while idling or creeping forward.
• Durability: Built intentionally with helical gears for quiet operation and robust electronic controls to monitor transmission fluid life, shift adaptation, and system diagnostics via the digital push-button shifter pad in the cab. 

• 30-Yard Capacity: This represents the actual volumetric capacity of the main storage box container (excluding the rear hopper loading mechanism). A 30-yard body is on the largest end of rear loaders, designed to handle heavy commercial routes or long municipal lines before needing to tip at the landfill.
• The Packing Mechanism: Pak-Mor utilize a dual-acting hydraulic system powering heavy slide-and-sweep cycles. The controls feature an automatic engine-throttle advance mechanism—when you pull the packing lever on the curbside rear, the truck automatically increases RPMs to deliver maximum fluid pressure to the packing blade.
• Compaction and Ejection: The packer exerts high compaction forces to compress loose waste into dense blocks. It utilizes a full-ejection unloading design featuring a multi-stage hydraulic telescopic cylinder connected to an internal ejector panel. When dumping at the landfill, the entire tailgate lifts hydraulically, and the panel pushes the load out cleanly without tilting the truck body.
• Construction Quality: Features automatic mechanical tailgate locks, safety steps with high-clearance grab-handles for riding crew members, and an integrated, high-capacity underbody hydraulic reservoir with filtration systems to keep the oil cool during high-cycle routes. 

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.