Fleet # –
Year – 2007
Make – Gradall
Model – XL4100II
Body Style – Wheel Excavator
Serial Number – 4100000205
Odometer Numbers – 21575
Hours –
Engine Make/Model – Mercedes-Benz OM906LA electronic, rated at 260 hp
Cyl – 6
Fuel Type – Diesel
Transmission Name – Eaton Roadranger RTX-14609B, a 9-speed forward and 2-speed reverse
Transmission Type – Manual
Single Axle/Dual Axle – Tandem Axle Dual wheel
Tire Size/Type – 11R22.5
Tire Condition – Fair
Plow Size –
Dump Box Size –
Drivetrain – 6×4
GVWR – Operating weight 46,220lbs.
Does the unit operate? – Yes
Does the vehicle start? – Yes
Are keys available? – Yes
Ownership Information – Transferable Registration
Mechanical Condition – Poor
Mechanical Notes – Highway speed: up to 55 mph. Has an electrical issue that while on a job causes the engine to throttle down. It is operational except when the unit throttles down, this problem is undiagnosed.
Body Condition – Fair
Body Notes – Solid with average rust and wear and some lower cab spot rot, view images. It comes with a 5'L ditching bucket.
Interior Condition – Fair
Misc Info –
The following general information is web-sourced and may contain variances from the subject unit:
2007 Gradall XL4100 II (PIN 4100000205) is a high-speed, multipurpose wheeled excavator known for its ability to travel at highway speeds and operate in tight spaces thanks to its low-profile telescoping boom. This specific unit belongs to the Series II generation.
Engine and Drivetrain
- Engine: It is powered by a Mercedes-Benz OM906LA 6.4L, 6-cylinder electronic diesel engine. It is rated at approximately 250 hp (gross) at 2200 RPM.
- Transmission: Equipped with an Eaton Roadranger RTX-14609B manual transmission, providing 9 forward speeds and 2 reverse speeds.
- Drivetrain: Features a 6×4 configuration with a 171-inch wheelbase, suitable for stable highway transit and off-road job site positioning.
- Travel Speed: Capable of over-the-road travel speeds up to 60 mph, allowing it to be driven directly to job sites without a trailer.
Excavator Performance
- Operating Weight: Approximately 46,220 lbs, providing significant stability without the need for outriggers.
- Telescoping Boom: The signature Gradall boom can tilt 220° continuously, making it ideal for specialized tasks like grading, sloping, and working under low obstructions like bridges or trees.
- Digging Depth: It can reach a maximum digging depth of roughly 20' 10" (6.3 m).
- Reach: Maximum radius at ground line is approximately 30' 1" (9.2 m).
- Remote Drive: From the upper operator cab, the machine can be maneuvered around the job site using a remote propel system, typically at speeds up to 5 mph.
Hydraulic System
- Pumps: Utilizes a load-sensing axial piston pump with a total flow of 0-77 GPM.
- Operating Pressures:
- Hoist/Tool/Telescope: 4,800 psi.
- Swing: 4,200 psi.
- Remote Propel: 3,750 psi.
Operator Environment
- Cabs: Features two cabs—one for highway driving and a specialized upperstructure cab for excavation.
- Controls: The upper cab includes all-weather insulation, air conditioning, and dual hydraulic joysticks for boom control. The joysticks often feature a quick-change pattern selector (Gradall, Deere, or SAE)
Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.
