Fleet # –
Year – 2007
Make – Peterbilt
Model – 357
Body Style – Dump & Plow Truck
VIN/SN – 1NPALB0X57N667253
Odometer Numbers – 114287
Hours – 7382
Engine Make/Model – CAT C15
Cyl – 6
Fuel Type – Diesel
Transmission Name – Eaton Fuller RTO16908LL
Transmission Type – Manual
Single Axle/Dual Axle – Tandem Axle/Dual Wheel
Tire Size/Type – 12R24.5
Tire Condition – Fair
Plow Size – 11
Dump Box Size – Henderson 14 x 60 x 304SS
Drivetrain – 6×4
GVWR – 66,000lbs
Does the unit operate? – Yes
Does the vehicle start? – Yes
Are keys available? – Yes
Ownership Information – Title
Mechanical Condition – Good
Mechanical Notes – Well maintained. No known issues and is being sold due to normal rotation of equipment.
Body Condition – Good
Body Notes – Dump body and plow equipment in working condition. Solid with less than average wear for age, view images. 14" Stainless steel body with powered tailgate & tarp system.
Interior Condition – Good
Misc Info – Bidders are encouraged to inspect.
The following general information is web-sourced and may contain variances from the subject unit:
2007 Peterbilt 357 6×4 is a heavy-duty vocational dump and municipal snow-fighting truck built for severe winter maintenance and heavy hauling. With a 66,000 lb GVWR, big-bore Caterpillar power, and corrosion-resistant stainless-steel equipment, it is specked as a year-round workhorse capable of moving heavy aggregates in summer and clearing highways in winter.
1. Chassis & Drivetrain
- Peterbilt 357 Vocational Chassis. The Model 357 is Peterbilt’s purpose-built severe-service platform featuring a heavy-duty channel frame and an all-steel/aluminum-reinforced cab. Its set-back front axle improves weight distribution (essential when carrying a heavy front plow) and tightens the turning radius for cul-de-sacs and job sites.
- VIN Breakdown (1NPALB0X57N667253). The 1NP prefix confirms manufacture by Peterbilt Motors Company in the USA. The 7 in the 10th position verifies the 2007 model year, and the N in the 11th position indicates assembly at the Denton, Texas plant.
- Axles & Tires. Configured as a 6×4 tandem-axle with dual rear wheels and heavy-duty 12R24.5 tires, the tall 24.5-inch tire profile provides extra ground clearance, high load capacity, and strong sidewall stability under heavy plow and dump loads.
2. Engine: Caterpillar C15
- Big-Bore Displacement. The Cat C15 is a 15.2-liter (927 cu. in.) inline 6-cylinder diesel featuring wet cylinder liners, a single overhead cam, and Mechanically Actuated Electronic Unit Injection (MEUI).
- ACERT Technology. For the 2007 model year, the C15 utilized Caterpillar’s ACERT (Advanced Combustion Emissions Reduction Technology) system, which uses series twin turbochargers and variable intake valve actuation to boost torque and manage emissions. Depending on the specific ECM calibration, 2007 C15 engines produce between 435 and 625 horsepower and 1,550 to 2,050 lb-ft of torque.
- Emissions Note. Depending on the exact build date of the engine in 2006/2007, this truck will either be a sought-after pre-DPF EPA '04 engine (no Diesel Particulate Filter) or an early EPA '07 engine equipped with a DPF (neither uses DEF/urea, which did not arrive until 2010).
3. Transmission: Eaton Fuller RTO-16908LL
- 10 Forward Speeds (8LL Configuration). The Eaton Fuller RTO-16908LL is a heavy-duty vocational manual transmission offering 8 highway road speeds plus 2 ultra-deep reduction gears (Low and Low-Low) and 3 reverse gears.
- High Torque Rating. The 16 in the model number indicates a 1,650 lb-ft torque capacity, easily handling the C15's output under full 66,000 lb loads.
- Vocational Ratios. With a deep 14.56:1 Low-Low gear and a 0.74:1 overdrive top gear, it gives the driver fine crawl control when spreading salt, paving, or pulling out of muddy job sites, while still cruising efficiently at highway speeds.
4. Dump Body: Henderson Stainless Steel
- Dimensions & Material. 14-foot-long dump body with 60-inch-tall sides constructed from 304-grade stainless steel. Built by Henderson Products (typically their Mark E series), 304 stainless steel is the gold standard for municipal snow trucks because it will not rust out from corrosive road salt and brine.
- Tailgate & Tarp. A powered tailgate (air or hydraulic) lets the driver release loads from inside the cab without stepping out into traffic or deep snow. The electric/hydraulic tarp system keeps aggregate, asphalt, or salt covered and compliant with DOT load-securement laws.
5. Snow & Ice Control Equipment
- 11' Stainless Steel One-Way Plow. Designed for high-speed highway and arterial road clearing, a one-way plow throws snow continuously to the right side of the road. The stainless steel moldboard prevents wet snow from sticking and resists salt corrosion.
- 11' Steel Wing Plow. Mounted to the right side of the truck frame, the mid-mount or rear-mount wing extends the clearing path by several extra feet, allowing the truck to clear a full highway lane plus the shoulder in a single pass.
- Spreader-Ready Hydraulics & Controls.
- Rear Hydraulic Lines. Plumbed directly to the rear bumper/tailgate area to power an under-tailgate auger spreader or a drop-in V-box salt/sand spreader.
- DICKEY-john Control Point. This closed-loop spreader controller automatically adjusts granular (salt/sand) and liquid pre-wetting application rates based on the truck's ground speed. It also features a manual Blast button for heavy ice patches at intersections and bridges.
Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.
