SALO GLASS CLOSED ALL MUST GO EQUIPMENT AND SUPPLIES DOBID ONLINE AUCTION

Business Auction in SALO GLASS, Duluth Minnesota, United States

07 Monday
May 07th, 2018 8:00 PM
Oberfoell Auctioneers
Phone: 218-735-8619

SALO GLASS CLOSED ALL MUST GO EQUIPMENT AND SUPPLIES DOBID ONLINE AUCTION

Business Auction in SALO GLASS, Duluth Minnesota, United States

Monday at - 07th May , 2018

Notes

WHAT DO YOU HAVE TO SELL? CONTACT DON [email protected]

INSPECTION DATES:

Wednesday, May 2, 2018 FROM 11:00 A.M. to 4:00 P.M.

 

PAYMENT & PICKUP DATE:

Tuesday, May 8, 2018 FROM 11:00 A.M. to 5:00 P.M.
Wednesday, May 9, 2018 FROM 10:00 A.M. to 5:00 P.M.
***ALL ITEMS MUST BE REMOVED BY 5:00 PM ON WEDNESDAY, MAY 9TH. IF YOU CANNOT REMOVE YOUR ITEMS AT THIS TIME PLEASE DO NOT BID! THANK YOU!***
Please bring the proper equipment, materials and Help to load and haul your items, some items are heavy and large!

 

IF YOU CAN'T REMOVE AT THIS TIME, PLEASE DO NOT BID.

 

PROCEDURE:
Online Bidding Only. The auction will start to close at 8:00 PM Monday,
May 7, 2018
. The close will be staggered (3 Lots every 1 minute). In addition
there will be Extended Bidding, which means items that have bids placed
within 3 minutes of its closing time, the time will extend for 3 minutes.
This will continue until there is no activity for 3 minutes.

PAYMENT TERMS:
Cash, Cashier's Checks, Money Orders (Payable to Oberfoell Auctions), Visa/Master Card-on invoices up to $5,000.00, and Wire Transfer. (Good Personal & Business Checks are accepted, however, Oberfoell Auctions reserves the right to require a Bank letter of guarantee, guaranteeing payment in full, without condition upon demand.)
THERE IS A 10% BUYERS FEE AND MN SALES TAX (Bring Tax Exemption Certificate for Resale Companies)

TERMS
BIDS CANNOT BE RETRACTED ONCE PLACED.
ALL ITEMS ARE SOLD "AS IS * HOW IS * WHERE IS" WITH ALL FAULTS. Neither the Auctioneer nor the Seller gives any type of guarantee or warranty, implied or otherwise. These items are offered for auction and their descriptions are from sources deemed reliable and submitted subject to errors, omissions, and change without notice. No allowance will be made for errors in cataloging, genuineness, defects or identification purposes only. There are no returns, refunds, or adjustments. THE ENTIRE RISK AS TO THE QUALITY, AUTHENTICITY & CONDITION RESTS WITH THE BUYER. BUYER ASSUMES COMPLETE AND SOLE RESPONSIBILITY FOR INSPECTION OF ITEMS PRIOR TO BIDDING AND RELIES SOLELY ON THEIR OWN INSPECTION AS TO THE CONDITION AND VALUE OF ITEMS.
You must read our terms and conditions and register before bidding on this Auction.
Bidder agrees to remove purchased items within the time frame outlined in the auction information.
NOTE:* PLEASE CHECK THE DESCRIPTION for the size of the lot you are bidding on (number of items per lot). DO NOT go by the picture (may show 1 item when description has multiples).

Removal Acknowledgement of Dangerous Auction Site: Potential bidders when inspecting and high bidders/purchasers or their agents acknowledge that an auction site is a potentially dangerous place. Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. High bidders will so advice their agents and employees. This acknowledged risk extends to all activities involved in the removal of items including disconnection of utilities. Persons attending the auction site during preview, sale or removal assume all risks of injury damage or loss of property an specifically release Do-Bid/Oberfoell Online Auctions and the seller from liability.

Item Removal Auction Site: Do-Bid/Oberfoell Online Auctions will announce the removal or "check-out" period for each auction on that auctions online site. Online auctions will have the details posted on the auction event page. Do-Bid/Oberfoell Online Auctions will assume no responsibility for any part of item removal. High bidders/purchasers will assume sole responsibility and risk for disassembling, disconnecting (including power and water and all utilities), loading and trucking all purchased items. Purchasers will repair personal property that is altered or damaged in the removal of their items. Should Do-Bid/Oberfoell Online Auctions consider such damage likely to occur, it may require Buyer to deposit such sum of money with Do-Bid/Oberfoell Online Auctions , by way of security for the costs of reinstating that part of the premises likely to be damaged by the removal of an item, as Do-Bid/Oberfoell Online Auctions may require. Should Buyer refuse to deposit such monies, Do-Bid/Oberfoell Online Auctions may refuse Buyer access to Do-Bid/Oberfoell Online Auctions premises or another removal site for the purpose of collecting all or any of the items it has purchased, or rescind the sale of such items.

Indemnification: Buyer indemnifies and holds harmless Do-Bid/Oberfoell Online Auctions, its directors, officers, employees, agents and the seller against any damage or loss which Buyer, Do-Bid/Oberfoell Online Auctions or third-parties may suffer or incur with respect to loss, damage or injury arising from the removal of an item.

SHIPPING:
DO-BID.COM WILL PROVIDE TRANSPORTATION OF SOME ITEMS TO ANY OF OUR DO-BID.COM LOCATIONS OR AFFILIATE LOCATIONS AND ALSO THE SHIPPIN� SHACK. FEES FOR THIS SERVICE ARE POSTED ON EACH ITEM IF THAT ITEM IS AVAILABLE TO BE TRANSPORTED BY DO-BID.COM. A DISCOUNT WILL BE GIVEN ON MULTIPLE ITEMS (25% DISCOUNT ON OVER 5 ITEMS, 50% DISCOUNT ON OVER 10 ITEMS). TRANSPORTATION OF ITEMS WILL BE ON EVERY OTHER WEEK. PAYMENT MUST BE RECEIVED BEFORE ITEMS ARE TRANSPORTED TO ANY DO-BID LOCATION, NO EXCEPTIONS.
CURRENT AFFILIATE LOCATIONS WE SHIP TO ARE: HERMANTOWN, BUHL, ELY, HIBBING, BEMIDJI, DETROIT LAKES, PINE RIVER, PARK RAPIDS, REMER, BOVEY.

Shipping is also available through THE SHIPPIN' SHACK in Grand Rapids, MN.
Do-Bid.com will transport your items to the Shippin' Shack who is able to ship your items directly to you.
The Shippin' Shack
2 NE 3rd St. 6b
Grand Rapid 218-327-4898
THE SHIPPIN' SHACK

 

 

TRANSPORTATION OF MERCHANDISE:
The buyer is solely responsibly for the disassembling, removal, and
transportation of all items. Do-Bid.com does not provide shipping,
transportation, or loading. Do-Bid.com will work with procuring your items for your shipping agent.

Map

Close

Location has been calculated by address and may not be 100% accurate.




Auction Items For Sale

SALO GLASS COMPANY WAS IN BUSINESS FOR ALMOST 30 YEARS AND IS NOW CLOSING IT'S DOORS. THE ENTIRE INVENTORY IS GOING! A GLASS GRINDER & POLISHER, VERTICAL GLASS GRINDER & POLISHER, GLASS TOOLS & GLASS PANEL INVENTORY, SAWS, DRILLS, HAND TOOLS, SPORTING GOODS AND SO MUCH MORE!!!
ALL ITEMS MUST BE REMOVED BY 5:00 PM ON WEDNESDAY, MAY 9TH. IF YOU CANNOT REMOVE YOUR ITEMS AT THIS TIME PLEASE DO NOT BID! THANK YOU!

 

1.2000 Chevrolet Express 3500 Van,
VIN # 1GCHG39R9Y1279066

Year: 2000
Make: Chevrolet
Model: Express
Vehicle Type: Van
Mileage: 180,000
Plate: MAC663 Exp: Aug 18
Drive Line: 2WD
Engine Type: V8, 5.7L
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1GCHG39R9Y1279066

Features and Notes:
AM/FM/CD radio
A/C
Hitch
Seats two
Cross tread ladder rack
Interior mounted glass rack
Exterior mounted glass rack

Known problems:
Drivers side door lock not working.

10/32nd tread remaining on Goodyear Wrangler tires, roof & sides are insulated, A/C blows cold - This is a good running work van!  Runs, Drives & was Driven In.


Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
Additional Fees that will be charged at Pickup/Titling: Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25, Filing fee: $10.00; State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.

Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:

  • NEW INSURANCE CARD (for this vehicle)

Or you may provide all three of the following:

  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE



1A.STEEL TILT BED UTILITY TRAILER 1-7/8", 12" TIRES
4.5' X 9' STEEL BED
COMES WITH NEW TAILLIGHTS THAT NEED TO BE MOUNTED
HOMEMADE FROM A BOAT TRAILER
TILT AWAY JACK
PERMANENT REGISTRATION #AAVJ541

Additional Fees Charged on Invoice: Documentation Fee: $20.00;
Additional Fees that will be charged at Pickup/Titling: transfer Fee: $3.00; Deputy Filing fee: $10.00; State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.

Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:

  • NEW INSURANCE CARD (for this vehicle)

Or you may provide all three of the following:

  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE

 

2.SOMMER & MACA VE-IP VERTICAL GLASS EDGER AND POLISHER
115 VOLT, 1/4HP
INCLUDES 2 DIAMOND WHEELS
ONE FLAT AND SEAM AND ONE PENCIL EDGE
4 POLISHING WHEELS 10' X 80.5"
WORKING UNIT
HAS NEW CIRCULATING PUMP

THIS ITEM HAS A REASONABLE RESERVE, IT WOULD BE WISE TO BE THE HIGH BIDDER!
 

2A.Cannon homemade replica with great detail in design. Pinto hitch overall length from tongue to end of barrel 9' 2" Barrel length 50" Could be used in many locations as an ornament. Great conversation piece.
 

3.VINTAGE SOMMER & MACA VERTICAL 4" X 132" BELT GLASS GRINDER WITH STEEL PORTABLE SLIDING TABLE.
ALSO COMES WITH 2 CANVAS WORK BIBS
STYLE #2M-432-WB
115/230 VOLT, 3/4HP, SINGLE PHASE MOTOR
WORKING UNIT
12' X 59" X 79"
INCLUDES (53) 4X132" BELTS!

THIS ITEM HAS A REASONABLE RESERVE, IT WOULD BE WISE TO BE THE HIGH BIDDER!
 

4.VINTAGE SAMUEL C. ROGERS SAW & KNIFE FITTING MACHINE
TYPE CC3, #42210
115/208-230 VOLT, 1.5HP SINGLE PHASE MOTOR
WORKING UNIT BUT MISSING SOME MOUNTING BOLTS
 

5.POW-R QUIP INDUSTRIAL 7500 WATT GENERATOR WITH ELECTRIC START
120/240 VOLT TECUMSEH ENDURO XL/C, 357 CC MOTOR
ONLY USED FOR APPROX. 10 HOURS ONLY!!
MODEL#GV75MG1300TP
GAS TANK HAS LEAK - WORKING UNIT
 

6.DENSO MOVIN COOL SPOT COOLING SYSTEM PORTABLE AIR CONDITIONER 24,000 BTU (MODEL# 24HFU-1)
230 VOLT, 1HP
INCLUDES LARGE VENT
WORKING UNIT
19.5" X 29" X 47.25"
 

6A.LARGE HOMEMADE 80 GALLON AIR COMPRESSOR
LESSON 230 VOLT, 5HP, SINGLE PHASE MOTOR
THERMO KING (MODEL# 422L) COMPRESSOR
OVERALL 72" TALL
WORKING WHEN TAKEN OUT OF SERVICE
INCLUDES 3 LARGE AIR HOSES!
 

7.HEAVY DUTY STEEL FRAME WINCH 30.5" X 19" X 16.5"
WIRE ROPE IS 3/8" THICK
 

8.HEAVY DUTY TOOL LINE BENCH GRINDER ON SOLID METAL FRAME
115 VOLT, 1HP, SINGLE PHASE MOTOR 24.5" X 11.5" X 15.5"
FRAME 20 X 13 X 30"
WORKING UNIT.
 

8A.DEWALT 12" COMPOUND MITER SAW (MODEL# DW705) IN GOOD WORKING CONDITION WITH STAND
 

9.VINTAGE AND RECONDITIONED RED JACKET WELL PUMP 49" TALL
ANTIQUE DUPLEX MFG. CAST IRON WINDMILL WATER PUMP 32" X 15" X 6"
INCLUDES BRASS FITTINGS
 

9A.12" SAW BLADES INDUSTRIAL CARBIDE COMBINATION 40, 48 & 80 TOOTH 12" DIAMOND BLADE CUT-OFF WHEELS 8, 8, &10"; TWO 12" BLADES
 

10.SEARS CRAFTSMAN 12" TABLE SAW ON PORTABLE METAL BASE
(MODEL# 113.24250)
INCLUDES FENCE, MITER GAUGES AND GUARD
51" X 30" X 36"
 

10A.SUMMERY & MACA GLASS DRILL WITH GLASS CUTTING CIRCULAR BITS 1/8" TO 5"
POWERS UP AND WORKS GREAT!!
COMES WITH 4-3/4" GLASS DAM AND 5 POUNDS OF SILICONE CARBIDE GRAIN.
 

11.VINTAGE CRAFTSMAN 24" HEAVY DUTY BANDSAW - NO MOTOR
MODEL# 103.0404
35" X 14" X 17.5"
 

12.VINTAGE SOMMER & MACA GLASS MACHINE GRINDER/GROOVER
STYLE# FG-14-BM13
115 BOLT, 1/3HP, SINGLE PHASE HOWELL MOTOR
WORKING UNIT 28" X 16" X 14.5"
 

13.VINTAGE SIEGLER ENAMEL RANGE CO. GAS STOVE
MODEL# 6048VBL
GOOD CONDITION
25" X 31" X 48"
BURNS FUEL OIL
WORKED GREAT WHEN LAST USED HAS BEEN STORED FOR YEARS.
 

14.STOCK SHEET OF FLOAT GLASS GREY 92" X 72" X .25"
 

15.STOCK SHEET OF FLOAT GLASS GREY 72" X 88.5" X 3/16"
 

16.STOCK SHEET OF FLOAT GLASS BRONZE 52-3/8" X 72" X 1/4"
 

17.TEMPERED INSULATED GLASS LOW/E
49.75" X 79.75" X .75"
 

18.82" X 65" X 1/4" BRONZE SOLAR COOLED
 

19.FLOAT GLASS BRONZE 36" X 73" X 1/4"
 

20.POLY CARBONATE SHEET 39" X 67-1/8" X 3/8"
 

21.AR MAKROLON POLYCARBONATE SHEET 27" X 34" X 1/2"
 

22.GRAY POLY CARBONATE 96.5" X 48.5" X 45.25" X 21.75" X 3/8"
 

23.LT GRAY POLY CARB. 6613/16" X 48-1/4" X 1/4"
 

24.ONE 48" X 84" X 1/8" CLEAR ANNEALED GLASS
THREE 60" X 84" X 1/8" CLEAR ANNEALED GLASS
 

25.10 SHEETS OF 48" X 84" X 1/16" SINGLE STRENGTH CLEAR FLOAT GLASS
 

26.1 SHEET 32" X 80" X 1/4" LAM. CLEAR .030
 

27.THREE 65" X 84" X 1/8"
ONE 48" X 84" X 1/16"
ONE 65" X 96" X 1/8" LOW E
 

28.38-7/16" X 96" X 3/16" LOW E.
 

29.42.5" X 76.25" X 1/4" CLEAR FLOAT
 

30.65" X 80.5" X 3/16" GRAY FLOAT
 

31.65" X 38.25" X 3/16" LOW E
 

32.FULL STOCK SHEET 1/8" CLEAR MIRROR 48" X 84" X 1/8"
 

33.32-3/4" X 72-5/8" X 3/4" TEMPERED UNIT INSULATED LOW E
 

34.28-9/16" X 67" X 3/4" TEMPERED INSULATED UNIT LOW E
 

35.8 PIECES DOOR LITES 1/4" TEMPERED BRONZE
37-3/8" X 77-1/8" X 1/4"
31-3/8" X 77-3/16" X 1/4"
35-1/2" X 90" X 1/4"
 

36.14 PIECES CUT-OFF'S MISC. SIZES FLOAT GLASS SOLAR COOLED, BRONZE, GRAY
28" X 90" X 1/4" THRU 29" X 82" X 1/4"
 

37.CUT-OFF'S .030 LAM.
8-15/16" X 78-1/2" 1/4" THRU 13-1/8" X 84" X 1/4"
 

38.3 PIECES FLOAT GLASS
14-1/4" X 84" X 1/16"
12" X 84" X 1/16"
9-5/16" X 84" X 3/16"
 

39.16 PIECES CUT-OFF'S TEMPERED
32" X 74" X 1/8" AVERAGE SIZE
 

40.2 PIECES TEMPERED SHOWER DOOR GLASS
28-3/4" X 62-1/4" X 3/16"
 

41.2 TEMPERED 1" LOW E UNITS CLEAR
30" X 76" X 1" AND 23" X 44.5" X 1"
 

42.MISC. STORM WINDOWS
 

43.32-9/16" X 39-1/4" X .030
TWO 36" X 45" X 3/8" SOLAR COOLED BRONZE LAM.
 

44.MISC. MIRRORS CUTOFF'S 1/4"
45-1/2" X 48"
47-1/4" X 48"
33-15/16" X 48"
 

45.MISC. CUTOFF PIECES PYROCERAM
 

46.MISC. FLOAT GLASS
1/16" X 1/8" X 3/16" X 1/4"
11 PIECES
 

47.MISC. FLOAT GLASS COLORED INSULATED UNITS.
 

48.MISC. WIRE GLASS
 

49.MISC. CUTOFFS 1/8" TO 3/8" MANY PIECES
CLEAR LOW E
 

50.MISC. CUTOFFS SOLAR COOLED BRONZE, GRAY LITE MOSTLY 1/4"
 

51.HOMEMADE GLASS DOLLY 62" X 6" X 12"
14" WHEELS
 

52.A-FRAME GLASS CART 46" X 31" X 48"
4" STEEL SWIVEL CASTERS
 

53.A-FRAME GLASS RACK 48" X 36" X 40"
 

54.A-FRAME GLASS CART 76" X 24" X 51"
8" SWIVEL CASTERS
 

55.A-FRAME DOUBLE SIDED GLASS CART
5" CASTERS; 2 SWIVEL
55" X 38" X 56"
WITH MISC. CUTOFF'S
 

56.STAINLESS STEEL CART ON 5" SWIVEL CASTERS 33" X 27" X 35"
 

57.STEEL ROLLING CART 4" SWIVEL CASTERS
30" X 16" X 33"
 

58.STEEL ROLLING CART 2" SWIVEL CASTERS
24" X 16" X 32"
 

59.12 PONY 6" METAL CLAMPS #3202
 

60.12 PONY 6" METAL CLAMPS #3202
 

61.12 PONY 6" METAL CLAMPS #3202
 

62.12 PONY 6" METAL CLAMPS #3202
 

63.12 PONY 6" METAL CLAMPS #3202
 

64.VINTAGE PLUM BUB 2" X 1-1/2"
VINTAGE ICE TONGS 20"
VINTAGE 35" SAW
VINTAGE DRAW KNIFE 12" BLADE
 

65.DRILL BITS CONCRETE AND WOOD
 

66.BLACK & DECKER 3-1/4" PLANER - TESTED WORKING
RYOBI SANDER - NO CHARGER AND NO BATTERY.
 

67.DENT & DING REPAIR KIT
MILWAUKEE CORDLESS CAULK AND ADHESIVE GUN
POWERLINE 300 WATT DC TO AC CONVERTER
 

68.VINTAGE HAND CRANK DRILL
HACKSAWS
SPEED SQUARES
LEVEL PLUS MORE
SEE PICTURES
 

69.2" TWO STRAP'S
2" RATCHET STRAP TRUCKERS
 

70.2 VICTOR METAL STRAPS
 

71.VINTAGE PULMOSAN #1750 JUNIOR GAS MASK WITH 2 FILTERS IN ORIGINAL BOX.
 

72.VINTAGE PULMOSAN #1750 JUNIOR GAS MASK
 

73.MAKITA 9.6 VOLT CORDLESS CIRCULAR SAW
MODEL# 5081D
WITH CHARGER, 2 BATTERIES AND EXTRA BLADES IN A METAL STORAGE BOX

MAKITA CORDLESS DRILL
MODEL# 6095D
COMES IN MOLDED CASE - TESTED WORKING.

 

74.CALIPER, MISC. METAL LATHE TOOLS.
 

75.WELLER SOLDERING GUN
SOLDERING IRON
WOOD BURNER
PENCIL TORCH
10X25 BINOCULARS
ENERGIZER FLASHLIGHT
STAPLER
HOLE PUNCH
125 VOLT PLUG END
 

76.GLASS CUTTING OIL
AT&T ANSWERING MACHINE
GARMIN NUVI 200 GPS WITH NO POWER SUPPLY
 

77.VINTAGE AMERICAN SCALE CO 1X6 SCREW JACK
NORTHERN INDUSTRIAL 12-TON HYDRAULIC JACK
4-WAY LUG NUT WRENCH
 

78.PREMIER BRAND PAPER CUTTER 13" X 13"
 

79.NICE SELECTION OF CEMENT TROWELS
 

80.TWO 39" X 4" SOMAGA LEATHER LIFTING STRAPS
PROFLEX LIFTING BELT
WRIST SUPPORTS
FOREARM GUARD
PAIR OF HARBINGER FINGERLESS GLOVES
 

81.MISC. HARDWARE, PLASTIC LAMPS, ROLLERS - SEE PICTURES.
 

82.VINTAGE CRESCENT SLIDE NAIL PULLER
VINTAGE STANLEY SCREWDRIVER
VINTAGE HAND DRILL
QUICKLINE LASER LEVEL
JOHNSON PITCH & ANGLE LOCATOR
VINTAGE GRAND #18 1-3/4" CASTERS
2 PAINT SPRAYERS
X-ACTO KNIVES
 

83.8' CHAIN 1/2" WITH 1 HOOK
7' CHAIN 3/8"
8' CHAIN 5/16" WITH 2 HOOKS
MISC. SMALLER CHAINS
 

84.TWO 1-7/8" BALLS
ONE 2" BALL
2 CLEVISES 3-1/8" AND 4" AND TWO 3-3/4"
SPLITTING MAUL 8"
2 HOOKS 3.5" AND 7"
 

85.TWO 12" COMPOSITE WHEELS WITH BEARINGS FOR 1" AXLE
 

86.2 SNOWPLOW SHOES 6" BASE 6" SHAFT
 

87.2 VINTAGE OIL PUMP CANS
2 VINTAGE HAMMERS(1 SEARS ROEBUCK)
HACKSAW
SCRAPER
 

88.VINTAGE PYRENE FIRE EXTINGUISHER 1 QUART #U49450
2 DRY CHEMICAL FIRE EXTINGUISHERS BADGER & KIDDIE
 

89.2' CROWBAR
2' SLEDGE HAMMER WITH STEEL HANDLE
2 HAMMERS
SMALL HATCHET
 

90.SANDPAPER SHEETS 80, 150, 220, 360 GRIT
7" 60 GRIT SANDING DISCS
6" -180 GRIT SANDING DISCS
6" CRAFTSMAN BUFFING WHEEL.
 

91.STANLEY BOSTITCH AIR BRAD NAILER
MODEL# BT50B
WITH 1/2 BOX 1-1/4" GALVANIZED BARDS IN A METAL STORAGE CASE

FLETCHER #32 GLASS CIRCLE CUTTER WITH THREE 2-1/4" SUCTION CUPS

 

92.4 HARD HATS
 

93.VINTAGE MONTGOMERY WARDS POWR KRAFT 1/2" DRIVE TORQUE WRENCH (#4970)
0-150 FT. LBS.
6" GEAR PULLER
IMPACT WRENCH
TIRE CHUCK
AIR BLOWERS
25' STANLEY TAPE MEASURE PLUS MORE.
 

94.D.A. SANDER
2 DIE GRINDERS
2 AIR BLOW GUNS
AIR CHISEL.
 

95.COLEMAN POWERMATE AIR DIE GRINDER DUAL ACTION SANDER
PNEUMATIC ANGLE DRILL
2 AIR BLOW GUNS
 

96.CRESCENT WRENCHES
C-CLAMPS
HAMMERS
HATCHET
FILE
10" PIPE WRENCH
 

97.JOHNSON & JOHNSON FIRST AID KIT
 

98.HOLE SAWS
WIRE WHEELS
GRINDING WHEELS IN A METAL TOOLBOX.
 

99.SKIL ELECTRIC DRILL
MILWAUKEE SCREW SHOOTER
BOTH TESTED WORKING.
 

100.VINTAGE CAR-PAK WING VENT PULLER
 

101.DESSICENT FOR INSULATED GLASS (7) 1 GALLON CONTAINERS
 

102.1 CASE SILICONE FOAM AND METAL SPACER I.G. SEALANT - 12 CARTRIDGES
 

103.9 SOMACA SHOW-CASE LOCKS
 

104.GLAZING TAPE & PIB FOR DOUBLE SEAL UNITS
 

105.MIRROR PLATES FOR DIMMER SWITCHES, SWITCH PLATES MOSTLY ACRYLIC SOME GLASS
 

106.SOMACA DUAL 5" GLASS LIFTING CUPS
POWER GRIP 8" GLASS LIFTING CUP
6" LIFTING CUP
 

107.DIAMOND GLAZING POINTS
MISC. STORE FRONT HARDWARE.
 

108.KEVLAR GLOVES, WRIST SUPPORTS, RUBBER GLOVES
 

109.GLAZING TOOLS
 

110.GLAZING POINTS, CORNERS
 

111.THOR ELECTRIC DRILL WITH GLASS HOLE CUTTING BITS
 

112.VINTAGE JAYCO KEY CUTTING MACHINE - POWERS UP
 

113.KETT METAL SHEARS - TESTED WORKING AND A TOOLBELT
 

114.1" ROUND LOCK CYLINDERS WITH KEYS
EXTERIOR LOCKING KEYED ENTRY BALL KNOBS
4 INTERIOR BED/BATH LOCK BALL KNOBS.
 

115.SAW BLADE KIT FOR ROTARY TOOLS
CHALK LINE
FLETCHER GLASS CUTTING TOOLS
NEEDLE NOSE PLIERS
SAFETY GLASSES
9" LEVEL
10" FILE WITH REPLACEMENT BLADES PLUS MORE
 

116.CRAFTSMAN, STANLEY AND ACE SCREWDRIVERS, FLAT BLADE, PHILLIPS, TORQUE AND MORE
 

117.GLASS LIFTERS AND NIPPERS
 

118.DRILL BITS AND ROUTER BITS
 

119.WIRE COATED SHELVING UNIT WITH CORNER FIX FINS 3/8" X 7/16" X 1/2" X 5/8" X 3/4" AND MORE
 

120.PLASTIC TOTE WITH 1 DRAWER
2 OZARK TRAIL RAIN SUITS SIZE M&S
 

121.WHEATLAND 1/2" X 10' EMT TUBE - 9 PIECES
 

122.SYLVANIA FLUORESCENT LIGHTBULBS 48", 40 WATT. 21 TOTAL
 

123.SOMACA STRAIGHT EDGE L-SQUARE 63" X 30"
 

124.CRL L-SQUARE 24" X 51"
 

125.STRAIGHT EDGE & L-SQUARE 8" X 38"
 

126.STRAIGHT EDGE AND L-SQUARE 12" X 28"
 

127.2 HEAVY DUTY STEEL PRY BARS 60" AND 78" LONG
 

128.Aluminum extrusions for window and screen frames. Various sizes  and styles.  Large assortment.
 
 

129.NATIONAL AUTO GLASS SIZES AND PATTERNS, BOOKS AND TEMPLATES
 

130.GLASS CUTOFFS IN VARIOUS SIZES AND THICKNESSES CLEAR AND TINTED
 

131.MIRRORS, CUTOFFS SOME BEVELED
 

132.2 ROLLS OF FELT 54" X 108" X 1/8", 76" X 142" X 1/8" WEAVE XX
 

133.1 ROLL OF FELT 140"
 

134.CUTOFFS MAKROLON POLYCARBONATE AND PLEXIGLASS 1/8", 1/4", 3/8", 1/2"
 

135.VINTAGE WWII GURNEY BY HUBENY BROTHERS INC.
ALUMINUM FRAME WITH HEAVY CANVAS 22" X 71"
ALUMINUM SUPPORTS 89" LONG
 

136.PANASONIC TV WITH BUILT IN VHS PLAYER - TESTED WORKING
COMES WITH 4 VHS MOVIES
DIEHARD 2
THE ROCK
THE SIXTH SENSE
THE ART OF WAR.
 

137.HEAVY DUTY ADJUSTABLE HEIGHT ROLLER STAND 28" TO 41"
LIGHT DUTY ADJUSTABLE HEIGHT ROLLER STAND 25" TO 41"
 

138.5 STRAIGHT EDGES 36", 37", 48", 72", 121" IN GOOD CONDITION.
 

139.4 VINTAGE WOOD STRAIGHT EDGES 71", TWO 95", 142" IN GOOD CONDITION.
 

140.1 EMPIRE 48" LEVEL
1 ALUMINUM 72" LEVEL
 

141.1/4" CLEAR TEMPERED GLASS WITH POLISHED EDGES
20+ PIECES 24" X 30.5"
TWO 23" X 30"
28 PIECES 23.5" X 26"
SIX 23.5" X 46"
 

142.BYPASS SLIDING GLASS DOORS
FOUR 22.5" X 27.5"
BRONZE 1/4" MIRROR
3 INSULATED GLASS UNITS: 8" X 36"; 23.75" X 14"; 26.5" X 26.5"
 

143.DIRT DEVIL 1600 PSI ELECTRIC PRESSURE WASHER IN GOOD WORKING CONDITION.
 

144.PROPANE HEATER 29" X 12" X 17" IN GOOD CONDITION.
 

145.WOOD GLASS DOLLY 5" X 60" IN GOOD CONDITION.
 

146.CRATE DOLLY 69" H IN GOOD CONDITION.
 

147.CHIMNEY BRUSH WITH 3 BRUSHES
8 TO 4' EXTENSION RODS
 

148.2 VINTAGE METAL BAR STOOLS 29" TALL
2 WOOD STOOLS WITH ROUNDED PADDED SWIVEL SEATS 24"H
 

149.1 PLASTIC TOOLBOX 20" X 9" X 9" WITH RIVET GUNS, RIVETS, RUBBER SHIMS, RAZOR BLADES
1 PLASTIC TACKLE BOX.
 

150.1/2 BOX OF COARSE THREAD #2 PHILLIP'S DRYWALL SCREWS 1-5/8"
1/3BOX OF PROSTRIP RING SHANK HEAD NAILS 2"
 

151.MITER BOX WITH SAW
 

152.MILWAUKEE ROUTER WITH GUIDE AND TABLE
VINTAGE CRAFTSMAN METAL TOOLBOX.
 

153.BLACK & DECKER 12" CUTOFF MACHINE - TESTED WORKING.
 

154.HOMELITE ELECTRIC CHAINSAW WITH EAR MUFFS - TESTED WORKING.
 

155.HUSQVARNA 450 CHAINSAW WITH EXTRA CHAINS AND BEAVER TAILS
TURNS OVER GOOD CONDITION.
 

156.BLACK & DECKER CORDLESS 24 VOLT, 13" WEED WACKER, COMES WITH 1 BATTERY AND CHARGER
 

157.VINTAGE TREE CLIMBING SPIKE SET
SAFETY BELTS
SAFETY LANYARD
ROPE GRAB
 

158.HALOGEN WORK LIGHT ON STAND WITH 4 EXTRA BULBS IN A CASE
 

159.HP 640 FAX MACHINE
 

160.VINTAGE METAL BOX WITH DRILL BITS, PHILLIPS, SQUARE DRIVE, TORX AND FLAT HEAD BITS, FILES, LEVEL, AND MORE - SEE PICTURES.
 

161.TITAN ELECTRIC HEATER WITH ADJUSTABLE TEMPERATURE CONTROL
SUNBEAM PROPANE HEATER
 

162.VINTAGE WIZARD JUNIOR 6 FOOT METAL TAPE MEASURE BY LUFKIN
16 FOOT STANLEY TAPE MEASURE IN A PLASTIC TOOLBOX.
MISC. SCREWDRIVERS AND MORE
SEE PICTURES
 

163.CRAFTSMAN 3X21" BELT SANDER 1/2HP - TESTED WORKING
INCLUDES MANY EXTRA BELTS 80 & 120 GRIT

RESIN BOND CLOTH 3M
3/4 BOX OF 1/2" H-CLIPS

 

164.METAL TOOLBOX WITH 12 KNOX 6" METAL CLAMPS, 2 PAIR OF KNEE PADS, POWER SENTRY POWER TAP
 

165.VINTAGE MITER BOX AND SAW 22.5"
VINTAGE MEAT SAW 22"
 

166.2 PIPE CLAMPS
3 ADJUSTABLE CORNER CLAMPS
 

167.PLASTIC TACKLE BOX LOADED WITH MISC. SCREWS, MOLLEY'S, RAZOR BLADES, DRILL BITS
 

168.3 GREASE GUNS
 

169.JEPSON 14" CUTOFF SAW
MODEL#9115
WITH 12+ HIGH SPEED MASONRY BLADES
TESTED WORKING - IN GOOD CONDITION.
 

170.STANLEY 4.5HP 5 GALLON WET/DRY VACUUM WITH EXTRA HOSE AND ATTACHMENTS - TESTED WORKING.
 

171.STANLEY TOOLBOX 26" X 10" X 10" WITH 14" BELT CUTTER, MISC. WRENCHES BOX, COMBINATION AND OPEN
1-5/8" COMBO SNAP-ON WRENCH
PROTO BRAKE TOOL AND MORE
SEE PICTURES.
 

172.VINTAGE METAL TACKLE BOX WITH MISC. SCREWS.
 

173.VINTAGE SAWBLADE TOOTH CUTTER
 

174.GLAZING TAPE 1/8", 1/4", 1/16" X 1/2"
 

175.BRAKE PARTS CLEANER, SEA FOAM BRAKE FLUED, NEVER DULL, STARTING FLUID AND MORE
 

176.2 SPOOLS OF 1/2" BACKING ROD
2 SPOOLS OF 3/8" BACKING ROD
1 SPOOL OF 5/8" BACKING ROD.
 

177.4 FOOT RACK LIGHTING KIT
41" GRAB BAR
WINDOW INSULATING KITS
58" LAMP , 16" ROUND GLASS NO SHADE
TOILET PAPER HOLDER
 

178.SILICONE SEALANT, AUTO GLASS URETHANE ADHESIVE WITH EXTRA TIPS, L-XL NITRILE GLOVES.
 

179.3-DRAWER PLASTIC STORAGE ON CASTERS WITH 4 VINTAGE DARNELL 4" LOCKING SWIVEL CASTERS ALSO MISC. 2" CASTERS
 

180.LARGE ASSORTMENT OF MISC.. SCREWS, NUTS, BOLTS, WASHERS, NAILS AND MORE
 

181."THE MINNIE MITE" VINTAGE ANVIL 9"L X 5"H AND 3" X 5.75" BASE
CASTING BLOWOUT
VERY COOL ANVIL
 

182.NEW CONDITION - NEVER INSTALLED ELECTRIC FAN FORCED WALL HEATER BY MARLEY
19" X 15" X 5"
240/208 VOLT

KENDALL 18" 3-SPEED ELECTRIC FAN -TESTED WORKING
7 OUTLET POWER STRIP

 

183.1 GALLON STRIP FAST POWER STRIPPER
1 GALLON R&O HYDRAULIC OIL - NEAR FULL
1 QUART LACQUER THINNER
1 GALLON ACETONE 2/3 FULL
THOMPSON'S WATER SEAL 2/3 FULL
 

184.NYLON CLIPS FOR CTS ALUMINUM
 

185.1 CASE CRL LINT FREE GLASS WIPES - 900 WIPES, FOUR 8 OUNCE SPARKLE CLEANER AND STAIN REMOVER
 

186.MISC. CLIPS, WINDOW TIED DOWNS, RIVETS, ZERT FITTINGS, CORNERS FOR STORM WINDOWS.
 

187.FUNNELS, ANTIFREEZE, HAND CLEANER APPROX. 3 POUNDS, RADIATOR STOP LEAK AND MORE.
 

188.VINTAGE 15" PULLEY X22"
 

189.LIVE ANIMAL TRAP 7" X 8" X 24"
 

190.FIREPLACE TOOLS
 

191.CAMPING GEAR:
COOLERS, TWIN AIR MATTRESS, 3 FOLDING CHAIRS (2 LIKE NEW CONDITION), 2 RACK PACKS.
 

192."OLD TOWN" ALUMINUM MOTOR MOUNT FOR CANOE 25" LONG
 

193.THREE 12" LOGGER'S , ONE WITH HANDLE
 

194.SEARS STUD FINDER, 2 ARROW STAPLERS, SWINGLINE STAPLER, ELECTRIC STANLEY STAPLER, TAPE MEASURE, FLASHLIGHT
 

195.4 SCREW IN ANCHORS: TWO 14" AND TWO 24"
4 HEAVY DUTY STEEL
HAMMER AND CHISEL
 

196.HINGES, STRIKER PLATES, MAGNETIC LATCHES
 

197.2 BUG ZAPPERS - BATTERY OPERATED
SKYSCAN ATOMIC DIGITAL CLOCK WITH OUTDOOR TEMPERATURE TRANSMITTER
OTTER CELL PHONE CASE AND CLIPS FOR IPHONE
50 CALIBER SHELL
410 BRASS CASE SLUG
 

198.4" WINDOW FLASHING AND 2.5" GASKET MATERIAL
 

199.MAGNETIC HEATER, JUMPER CABLES AND TROUBLE LIGHT
 

200.ROUND LOCK CYLINDERS WITH KEYS
2 CANDLE HOLDERS
 

201.WALL FASTERS, 1/8" X 2" SPRING WING TOGGLE BOLTS, SETTING BLOCKS FOR COMMERCIAL DOORS
 

202.RUBBER MOLDING FOR HEAVY EQUIPMENT GLASS INSTALLATION
 

203.PARTIAL TUBES OF GLAZING AND SPOT PUTTY, ALUMINUM JELLY RUST DISSOLVER, 1/2 GALLON PPG METAL CLEANER, BONDO BODY FILLER WITH HARDNER, BONDO GLASS FILLER WITH HARDENER
 

204.CO2 PAINTBALL CYLINDER WITH ADAPTOR, BALLPEEN HAMMER, TAPS, LEATHER TOOL POUCH.
 

205.2 WRIST ROCKETS, 2 GOGGLES, ENERGIZER HEAD LAMP, BICYCLE AIR PUMP, TROUBLE LIGHT.
 

206.2 LEVELS, EMPIRE 24", M-D 28"
3 SQUARES
2 METAL MEASURING STICKS.
 

207.AJC SHINGLE REMOVER TOOL
PARTIAL ROLL OF 36" WATER AND ICE SHIELD
2 VENT TACK ROOF FLASHINGS 3" & 4"
ALUMINUM 9" VENT CAP
 

208.WAGNER POWER PAINTER PLUS - POWERS UP
MARSHALLTOWN TEXTURE MATE DRY WALL HOPPER AND GUN
MARSHALLTOWN SANDING PAD ON A STICK.
 

209.2 ORANGE SAFETY CONES 18"H
MISC. ELECTRICAL WIRE CONNECTORS
220 PLUGS CONDUIT
SEE PICTURES.
 

210.STRICKER PLATES, SETTING PADS - SEE PICTURES.
 

211.9" WOODS POWER GRIP SUCTION CUP IN A METAL CASE
 

212.3M HYDRAULIC HAND PUMP #4031
OTC 10-TON HYDRAULIC RAM - NEW NEVER USED.
 

213.MISC. GEARS AND KNOBS - SEE PICTURES.
 

214.VINTAGE TRANSIT AND PLUM BOB IN ORIGINAL WOOD CASE WITH TRI-POD
 

215.1/2" PIPE BENDER
 

216.ZERO MAX POWER BLOCK (MODEL# E1)
 

217.VINTAGE ZEBCO AUTHENTIC 33 ROD & REEL IN GOOD CONDITION PLUS PUCK UP TOO.
 

218.HI LIFT JACK DRAWER 228, 48"H
 

219.ADAMS RITE LATCHES, PADDLE HANDLES, MAILBOX SLOTS FOR GLASS, CLAMP MATE FRAMER, MAD DOG GEAR BY STEARNS.
 

220.THINSULATE ULTRA 400 WADERS, SIZE 10
SOREL BOOTS SIZE 10
 

221.ALL-PRO SCOPE 3X-9X32
 

222.VINTAGE WINDOW WEIGHTS 11" & 17"
 

223.HOMEMADE METAL BRAKE 34"
 

224.METAL BASE WITH ROTATING TOP 15" X 14"
 

225.ANGLE IRON, METAL TABLE CART ON CASTERS, 1" SQUARE STOCK FRAME, MISC. METAL.
 

226.VINYL MOLDING FOR STORE FRONT, MISC. ROLLS
 

227.CHAIN BINDER 16" HANDLE

 

228.WIRE ROPE 7/16" & 1/2"
 

229.KNEISSL RS SNOW SKIS 58" WITH TYROLIA BINDINGS
 

230.VINTAGE ROYAL WESTERN CHIEF FORGE BLOWER
 

231.VINTAGE SCAFFOLDING JACKS 24" & 29"
 

232.LARGE SQUIRREL CAGE FAN 17" X 22" X 26"
 

233.PIPE BENDER 1-3/8"
 

234.5/8" REBAR 16 PIECES
BENT ROD APPROX. 33" X 36"
72 STRAIGHT 9 PIECES
 

235.4 HEAVY DUTY 8" CASTERS WITH BRAKES
 

236.ELBOWS, VALVES 3/4", 1" AND 1-1/4"
 

237.GEARS, PULLEYS, BLOCK & TACKLE, HITCH FOR TRACTOR
 

238.3 LADDER JACKS 28", 33", 38"
 

239.25 PIECES OF 3/4" REBAR APPROX. 144" LONG
 

240.METAL DURAWALL 9.5" X 120", 35+ PIECES
 

241.4 SWIVEL CASTERS
THREE 5"
ONE 6"
ONE 6.5" CASTER
TWO 5" WHEELS 1-1/8"
 

242.MISC. SAWMILL PARTS, GEARS AND PULLEYS
 

243.24 FOOT CTS STORE FRONT ALUMINUM
 

244.ROPE 3/4" & 1-1/2"
 

245.FOUR 12 FOOT SHOWER STYLE MARK EXTRUSIONS PLUS 6 FOOT PIECES
 

246.ALUMINUM LADDER RACK WITH 2 AIR PISTONS 98" X 64"
 

247.1/2" PEX APPROX. 100 FOOT, 1" CRESLINE 50+ FOOT
 

248.TROY BILT 14" TILLER
RUNS GOOD
TECUMSEH MOTOR
 

249.ANTIQUE 21.5" STEEL WHEELS ON AXLE
 

250.ANTIQUE HAND TRUCK 10.5" STEEL WHEELS
 

251.2 HYDRAULIC RAMS 24"
ONE 12" & ONE 9.5"
 

252.YARD MACHINES 26" SNOW BLOWER
POWER MORE 208 CC MOTOR, ELECTRIC START
LIKE NEW CONDITION
USED 6 TIMES
 

253.YARD MACHINES 20" PUSH MOWER
140 CC POWER MORE MOTOR
LINE NEW CONDITION USED ONE SUMMER
 

254.2 TURF SAVER RIMS & TIRES 15X6.00X6 WITH EXTRA INNERTUBE
 

255.HOMEMADE SANDBLASTER APPROX. 30 GALLON TANK AND 200 PSI
 

256.VINTAGE 4-DRAWER METAL FILE CABINET "SHAW-WALKER" WITH KEY 18" X 27" X 57"
 

257.SUNCAST HOSE REEL WITH 50 FOOT GARDEN HOSE
 

258.4 PLASTIC GAS CONTAINERS 6.5, 5, 2.5 & 1.5 GALLONS
 

259.3 PLASTIC GAS CONTAINERS 5 GALLON
 

260.(19) 6X16 3-HOLE CEMENT BLOCKS.
 

261.RAKES, SHOVELS, BROOM, HOE, AXE, PICKEROON.
 

262.WHEELBARROW, SHOVELS, RAKES, PITCHFORK, PICK AXE, TREE LIMBER AND MORE
 

263.RUBBERMAID ATV TRAILER
35" X 47" X 12"
8" WHEELS
REMOVABLE TAILGATE
 

264.16' X 5" X 3.5" STEEL SAWMILL RAILS (4 PIECES) 1/2" TO 5/8" THICK + THREE 8" RAILS.
 

265.100+ CONCRETE BLOCKS 7.5" X 11.75" X 15.5"
 

266.100+ CONCRETE BLOCKS 15.5" X 7.5" X 11.5"
 

267.60+ PIECES MISC. BLOCK.
 

268.3' X 5' STEEL ANGLE IRON FRAME FOR TABLE, U-CHANNEL FRAME
 

269.APPROX. 75 FEET OF 4" DRAIN TILE
 

270.7 FOOT ALUMINUM PICK 9.5"WIDE WITH HOMEMADE SCAFFOLDING 52" X 24" X 60"
 

271.HOMEMADE STEEL TABLE 43" X 14" X 27"
 

272.ALUMINUM AUTO POLE EXTENDABLE 82" TO 147", PREVIOUSLY USED IN PHOTO STUDIO
 

273.12 FOOT VERSA LADDER, STAPLETON STEP LADDER, MAGNA CART, HOMEMADE CREEPER
 

274.SURVIVAL FOOD VACUUM SEALED IN FOIL BAGS IN 5 GALLON BUCKETS, 2 WHEAT AND 1 PEARL BARLEY
 

275.SURVIVAL FOOD VACUUM SEALED IN FOIL BAGS IN 5 GALLON BUCKETS, 2 WHEAT AND 1 ROLLED OATS
 

276.SURVIVAL FOOD VACUUM SEALED IN FOIL BAGS IN 5 GALLON BUCKETS, 3 WHEAT
 

277.MISC. GLASS EXTRUSIONS
 

278.3 FOOT BOLT CUTTERS
 

279.VINTAGE WOOD 4' STRAIGHT EDGE
ALUMINUM SPEED CUTTER - FLETCHER SQUEEGEE
 

280.4 RUBBER MATS 5/8" THICK APPROX. 30" WIDE: 38", 72", 124", 161" LONG
 

281.4 RUBBER MATS 5/8" THICK 27", 42", 77", 144" LONG
 

282.5 RUBBER MATS THREE 3/8" THICK, TWO 1/2" THICK APPROX. 19" WIDE: 57", 75", 76", 81", 89" LONG
 

283.VINTAGE METAL COOLER, STORE FRONT BRACES, INSULATED SPACERS, 3 FULL 66 FOOT ROLLS 1/4" X 3/8"-1/2" & 5/8" PREMIUM PLUS BLACK 1 PARTIAL ROLL.
 

284.1/4" STEEL TUBE 10" X 12" X 37"
3/8" - 2" X 2" X 52" & 70"
5/16" COARSE THREADED ROD 71" LONG
 

285.3.25" WEBB I-BEAMS
TWO 43"; ONE 45.5"
 

286.GLASS RACK 71" X 60" MISSING A FEW RUBBER BAR PADS.