Lot: 625336
UPC:
Condition: New
Retail Price: $27.99
Size: 330x330mm
Neptune 4 Plus/ Neptune 3 Plus Double Sided PEI Build Plate 330x330mm
• SINGLE Neptune 4 Plus BUILD PLATE WITH 2 SCRAPER BLADES – Includes one flexible 330x330mm stainless spring-steel build plate and two stainless-steel scraper blades. Both sides are spray-coated with Textured PEI, allowing either side to be used for a distinctive textured first-layer finish and extended service life.
• DOUBLE-SIDED SPRAY-COATED TEXTURED PEI WITH IDENTIFICATION CODE – Both sides provide a consistent textured printing surface for printed models, while the built-in identification code may support plate-recognition workflows on compatible printers. Recognition features depend on the printer model, firmware and system support; update firmware where required.
• HIGH-TEMPERATURE ADHESION FOR COMMON FILAMENTS – The spray-coated Textured PEI coating is designed to withstand temperatures up to 300°C when the specified conditions are followed, and helps provide reliable first-layer adhesion for PLA, ABS, PETG, PC and other common materials. Use the recommended bed temperature, print profile and standard bed-leveling procedure. Keep filament dry, as nozzle height, moisture, contamination and filament type can affect adhesion.
• COOL-DOWN FLEXIBLE RELEASE WITH LESS SCRAPING – Allow the plate and model to cool to room temperature before removal, then gently flex the spring-steel sheet. Proper cooling and print settings may help models release with less effort and may reduce the need for glue or scraping. For stubborn residue after cooling, use a soft, non-abrasive cloth or brush. Do not force models off, over-bend the plate or drag metal tools across the coating.
• COMPATIBILITY & SIMPLE SURFACE CARE – Designed for compatible Bambu Lab printers using a 330x330mm magnetic platform, includingELEGOO Neptune 4 Plus, Neptune 3 Plus, Kobra 2 Plus, QIDI X-Max 3, Geeetech A30/A30 Pro?Tronxy X3S/X5S. Because platform dimensions and magnet layouts may vary by model, confirm exact compatibility before ordering. After installation, ensure the plate sits flat and run the printer’s standard bed-leveling procedure if necessary. Wash with warm water and mild dish soap; after the plate has cooled, 70–75% IPA may be used when appropriate. Avoid acetone, abrasive cleaners, harsh chemicals and metal tools. Each plate is inspected before shipment.